Learn Plant Care
← All Plants

Care at a Glance

⭐ Difficulty: Moderate
☀️ Light: Bright indirect
💧 Water: Every 7–10 days
🌡️ Temp: 60–90°F
🐾 Pet Safe: No ⚠️
🌫️ Humidity: High (60–80%)

King Anthurium Care Guide

Anthurium veitchii

By Learn Plant Care·Last reviewed: 2026-06-17·Toxicity verified via ASPCA
King Anthurium (Anthurium veitchii) with massive corrugated pendulous leaves in a greenhouse setting
King Anthurium — plant photo

Quick Answer

Most King Anthurium problems trace back to two things: insufficient light and inconsistent watering. It needs genuinely bright indirect light — not just near a window, but in the bright zone where you'd comfortably read without a lamp. Water when the top inch or two of soil is dry rather than on a schedule, and keep humidity above 50% for the best results.

Difficulty

Moderate

☀️Light

Bright indirect

💧Watering

Every 7–10 days

🌫️Humidity

High (60–80%)

🌡️Temperature

60–90°F

📈Growth Rate

Slow

Toxicity

⚠️ Toxic to Cats⚠️ Toxic to Dogs⚠️ Toxic to Humans

Source: ASPCA Animal Poison Control

Watering

Summer

Every 7–10 days

Winter

Every 10–14 days

Method: Water when top 1–2 inches dry; use chunky well-draining mix; allow drainage; susceptible to root rot if overwatered

In summer, aim to water king anthurium approximately every 7–10 days; in winter cut back to around every 10–14 days. Rather than following a calendar, water when the top 1–2 inches of soil feel dry. Water thoroughly until water drains from the bottom, then don't water again until the soil passes the dryness check. Yellow leaves often signal overwatering; drooping with dry soil means it needs water now.

Light Requirements

Bright indirect

King Anthurium does best in 2–3 feet from a south- or east-facing window, screened from direct midday sun. A sheer curtain is fine for filtering harsh afternoon sun. King Anthurium adapts to lower light but grows more slowly and the leaves may become smaller.

Soil & Potting

Soil: Very chunky epiphyte mix: orchid bark, perlite, charcoal, sphagnum moss

Pot: Terracotta or net pot to allow excellent drainage and airflow around roots

Temperature & Humidity

Temperature: 6090°F (1632°C)

Humidity: High (60–80%)

Fertilizing

Frequency: Monthly in spring/summer at half strength; skip fall/winter

Type: Balanced or slightly phosphorus-rich liquid fertilizer

Common Problems

Root rot

Root rot: Overwatering in dense soil. Repot into chunky epiphyte mix; remove rotten roots. Check the roots: if they're dark, mushy, or smell off, root rot has set in. Unpot the plant, trim all affected roots with clean scissors, dust with cinnamon, and repot in fresh dry mix before resuming a cautious watering schedule.

Yellow leaves

Yellow leaves: Overwatering or nutrient deficiency. Check moisture; fertilize monthly in season. Yellow leaves that start on the lower or older growth first usually point to overwatering. Check the soil — if it's wet, hold off entirely until it dries out properly. Less commonly, yellowing comes from low light, nutrient deficiency, or the natural ageing of older leaves.

Small leaves not growing larger

Small leaves not growing larger: Insufficient light or humidity. Brighten location; raise humidity. Catching the problem early makes it much easier to fix — watch for early warning signs and act before the plant is in serious distress.

Spider mites

Spider mites: Very common in low humidity. Treat early and aggressively. Check under leaves and along stems regularly, since pests establish colonies before becoming visible from above. Treat with insecticidal soap or neem oil, covering the undersides of leaves, and repeat every 5–7 days for at least three rounds.

Propagation

The most reliable way to propagate King Anthurium is by division at repotting time. Unpot the plant and gently work the root mass apart with your hands or a clean knife, ensuring each section has healthy roots and at least 2–3 leaves. Pot each division into fresh mix and water lightly. The common mistake: being too tentative. It's fine if some roots are disturbed — the plant is resilient once it has its own established root system.

Seasonal Care Calendar

🌸 Spring

Spring is when King Anthurium starts actively pushing new growth as day length and light intensity increase. Increase watering frequency as the plant becomes more active, begin fertilising every 2–4 weeks with a balanced liquid fertiliser, and this is the ideal window for repotting or taking cuttings.

☀️ Summer

Summer is peak growing season — King Anthurium is working hard and using water and nutrients faster than at other times of year. Water more frequently but check the soil rather than going on a fixed schedule, since heat and higher light accelerate drying. If you move it outdoors, introduce it to conditions gradually to prevent sun scorch.

🍂 Fall

Fall is a transition: King Anthurium grows more slowly as light levels decrease. Reduce watering frequency slightly, stop fertilising by late October, and move it closer to a window to compensate for shorter days. Avoid drafts from opening windows as temperatures drop. Watch for flower buds developing around spring–summer (mature plants) — avoid repotting or relocating the plant at this time.

❄️ Winter

In winter, King Anthurium enters a slower-growth phase and uses water more slowly than in summer. Water less frequently to avoid root issues from soil staying wet too long in low light. If your home is heated and the air is dry, a pebble tray or humidifier keeps the plant comfortable.

Frequently Asked Questions

What mix should I use for King Anthurium?
The best approach with King Anthurium is observation over fixed schedules. Check the soil before watering, monitor the light your plant actually receives throughout the day, and adjust based on how it looks. Healthy new leaves that come in correctly sized and well-coloured are your signal that conditions are right.
How fast does Anthurium veitchii grow?
The best approach with King Anthurium is observation over fixed schedules. Check the soil before watering, monitor the light your plant actually receives throughout the day, and adjust based on how it looks. Healthy new leaves that come in correctly sized and well-coloured are your signal that conditions are right.
How do I get bigger leaves on my King Anthurium?
The best approach with King Anthurium is observation over fixed schedules. Check the soil before watering, monitor the light your plant actually receives throughout the day, and adjust based on how it looks. Healthy new leaves that come in correctly sized and well-coloured are your signal that conditions are right.